Maintaining rotary screw air compressors is crucial for their longevity and optimal performance. This article provides general maintenance tips to help teams adopt best practices. Remember, these are general service tips, and specific issues may require additional work.
Initial Maintenance
Initial maintenance is typically recommended after the first 600 hours of operation. This includes a “break-in” change of the oil and oil filter. After this, routine maintenance practices should be followed.
Routine Maintenance
Routine maintenance can be broken down by specific parts:
- Oil filter: The oil filter should be changed every 1,000 hours of use, depending on the environment. The dirtier the setting, the more frequently it should be changed.
- Air filter: The air filter should be changed approximately every 2,000 hours of use, again depending on the environment it’s being used in.
- Separator: This should be changed annually or every 4,000 running hours, whichever comes first. It should be completed along with an oil change.
- Belts: These should be checked regularly for correct tensioning and are usually changed between every year to 18 months.
Conclusion
Regular servicing of your rotary screw air compressor is essential for its longevity and performance. By following these general maintenance tips, you can ensure your compressor remains in optimal condition.
FAQs
Q1: When is the initial maintenance of a rotary screw air compressor recommended?
A: Initial maintenance is typically recommended after the first 600 hours of operation. This includes a “break-in” change of the oil and oil filter.
Q2: How often should the oil filter and air filter be changed in a rotary screw air compressor?
A: The oil filter should be changed every 1,000 hours of use, and the air filter should be changed approximately every 2,000 hours of use. These frequencies can vary depending on the environment the compressor is used in.
Q3: When should the separator and belts of a rotary screw air compressor be serviced?
A: The separator should be changed annually or every 4,000 running hours, whichever comes first. Belts should be checked regularly for correct tensioning and are usually changed between every year to 18 months.
